Grease Upper And Lower Center Pins; Replace Engine Oil And Filter (After First 50 Hours) - Doosan DL160 Operation And Maintenance Manual

K. Grease rear axle pivot, 2 locations. Use remote
grease fittings mounted on left side of frame (Figure
45).

Grease Upper and Lower Center Pins

1. Center pins, upper (Figure 46) and lower (Figure 47). Two
locations on right side of machine.
Replace Engine Oil and Filter
(After First 50 Hours)
NOTE: Replace engine oil and filter after first 50 hours on a
new machine and every 500 hours thereafter.(See
page 4-48)
Inspection, Maintenance and Adjustment
Figure 45
Figure 46
Figure 47
FG001641
FG001642
OP000756
4-35