Table of Contents
Advertisement
10. Examples
Now, we show many examples of AT commands set for handling WizFi210 according to usage
of WizFi210 and its network configuration.
If user uses WizFi210 with UART firmware, he can use these examples without any modification.
Otherwise, if they use it with SPI interface, then he has to add byte stuffing function to UART AT
commands and responses. For it, refer to "3.2 SPI" section.
10.1. Station Mode, TCP Client and Auto Connection
This is the popular example that user handles WizFi210 for their application.
WizFi210 operates as a WiFi Station to associate with another AP to communicate with a peer
system, After associating with AP, it makes a TCP client socket and connect to a server socket
on the peer system.
10.1.1. Example 1 of commands sequence
Using "AT+WAUTO", "AT+NAUTO" and "ATA"
(WIZnet Co., Ltd.)
WizFi210
Programmers' Guide
10-69
Advertisement
Table of Contents
