Table of Contents
Advertisement
<Esc>O
<Esc>F
Table 21 Escape Sequence for receiving data in command mode
WizFi210
Programmers' Guide
When WizFi210 received data thru an UDP socket under
BULK mode, it send it to host with below format.
<Esc>y<CID><IP Address> <port>\t<data>
Example:
When WizFi210 receive data (e.g. Hello) thru CID 0,
WizFi210/220 transfer it to host as below
<Esc>y0192.168.1.1 52\t0005Hello
"OK": This sequence is sent to the serial host by the
WizFi210/220 upon successful completion of the commands.
"FAILURE": This sequence is sent to the host by the
WizFi210/220 Adapter if an command failed.
(WIZnet Co., Ltd.)
4-45
Advertisement
Table of Contents
