How To Filter Internet Access Via Mac Addresses - Tenda I-WL-O3 User Manual

❷
Internal IP: Specify the internal host's IP address. In this example, enter 192.168.0.101.
❸
Internal/External Port: Specify the internal port and external port. Contact the corresponding
service provider or google it if you don't know the port number of the service to use.
❹
Protocol: Specify the protocol required for the service utilizing the port(s). Select TCP/UDP if
you are not sure.
❺
Public Service: Some common public service ports are available here. If the service port you
want to use is included in its drop-down list, select the corresponding one. If not, select None.
❻
Click Save to apply your changes.
Now, your friends only needs to enter
FTP server. xxx.xxx.xxx.xxx is the router's WAN IP address.
Note:
If you use the port number 80 here, you must set the port number for remote Web access (Click
Advanced > Network Service to locate the Remote Web Access section) to any port number
excluding 80 to avoid conflicts. Otherwise the port forwarding feature may not be effective.

How to Filter Internet Access via MAC Addresses

This section allows you to set that specific clients can or cannot access the Internet via devices'
MAC Addresses. Note that this function is only available in WISP and Router mode.
ftp://xxx.xxx.xxx.xxx:21
47
3 Advanced Settings
in their browsers to access your