Patterson-Kelley P-K STORM ST-5000 Installation & Owner's Manual page 78

ST-2500-ST-4000
a. Check all joints and pipe connections for tightness.
b. Check pipe for corrosion or deterioration. If any piping needs replacing, do so
immediately.
c. Inspect and clean any screens in the vent terminal.
8. Qualified service personnel should thoroughly inspect the heating system and correct any
problems prior to re-starting the boiler.
9. Perform combustion analysis and readjust as necessary according to the Combustion Setup and
Adjustment combustion settings table.
Refer to 3.11.2.
It is recommended that a copy of this report is filed for future reference.
10. Perform a leak test of the gas valve in accordance with the gas valve manufacturer's
instructions.
Revised: December 8, 2021
Released: December 8, 2021
INLET
OUTLET
DRAIN
VALVE
 Patterson-Kelley 2021
All Rights Reserved.
TM
P-K Storm Gas Fired Boiler
Technical Service 1.877.728.5351
ST-5000-ST-6000
2691000273 P-K Storm ST2500-ST6000
Installation and Owners Manual Rev C.docx
Page 67