Russell Hobbs RHSV1801 Manual page 9

TURBO VAC ASSEMBLY
Ensure the power is switched off before assembling.
1. Insert the assembled handheld vacuum unit into the main frame
as shown in the diagram - suction inlet first then pushing the unit
forward to lock into place.
2. Align the bottom of the frame with the connector on the ball joint
of the floor head, inserting the connector until it 'clicks' into place
and secures. Tilt the cleaner forward so it stands up independently.
3. Lift the main handle up in an anticlockwise direction until it 'clicks'
into place. Note: Take care not to trap skin or hair.
4. The main vacuum unit is now ready to be used as a floor cleaner,
once you have given it a charge.
1
3
2
4
9