Using Your Turbo Vac - Russell Hobbs RHSV1801 Manual

USING YOUR TURBO VAC

Once assembled and charged:
1. Lift the vac off the charging dock and place on the floor.
2. Support the floor head with your foot and pull back the handle
3. Press the main unit power switch downwards to start the power.
This will illuminate the power indicator light on the floor head.
4. Move the cleaner floor head in a forwards and backwards motion
over the areas you would like to clean.
Note: Large items can get trapped in the brush/floor head which
could cause the unit to overheat. Make sure you pick up larger items
that could get trapped before vacuuming.
5. To turn off the power, pull the main unit power switch upwards.
The power indicator light will turn off.
1
3
2
4
11