Related Manuals for Russell Hobbs RHRV200 R-VAC PET
Summary of Contents for Russell Hobbs RHRV200 R-VAC PET
- Page 1 ROBOTIC VACUUM 2 YEAR LIMITED REPLACEMENT WARRANTY* RHRV200 INSTRUCTIONS & WARRANTY...
- Page 2 (Warranty Period), for the period of:- (a) Two (2) years for Russell Hobbs products (see product packaging for details) (b) Two (2) years with ve (5) year motor warranty for Russell Hobbs products (see product packaging for details) (c) Limited Lifetime, Ten (10) years for Russell Hobbs cookware.
-
Page 3: Components
Warranty Conditions 4. The Goods must be used in accordance with the manufacturer’s instructions. This Warranty does not apply should the defect in or failure of the Goods be attributable to misuse, abuse, accident or non-observance of manufacturer’s instructions on the part of the user. - Page 4 TABLE OF CONTENTS Warranty Remote control & Programming Components Space Isolator Quick start guide Charging Station Battery replacement & installation Maintenance Applicability: Charging methods Trouble shooting Functions Customer Service The product, mainly applicable to home, hotel rooms and small office, is good for cleaning various short-haired carpet, wood floor, ceramic tile, etc.
- Page 5 Structure Introduction Structure Introduction AUTO / automatic cleaning Power indicator light Handle SPOT / spot cleaning CHARGE / charge Top cover Signal receiver Auto-charging electrodes Wall detection sensors Floor brush (removable) Left wheel Dust bin Edge/Drop detection sensors Main brush (removable) UV lamp Battery cover (removable) Power switch...
-
Page 6: Battery Installation And Replacement
QUICK START GUIDE While the R-Vac Pet is a complex product, we have committed to making the operation as user friendly as possible. As a result of this, you can have your R-Vac Pet working for you by following our 3 quick steps. 1. - Page 7 may be damage or accident. cleaner is not in use. ure using the original battery of the manufacturer for replacement, otherwise there IMPORTANT: When not in use, keep the vacuum on charge to get the best performance from the battery. Alternatively, switch the Power switch to the OFF position when not in use. be damage or accident.
- Page 8 CHARGING YOUR R-Vac Pet Manual charge: Manually place the vacuum on charge - there are 2 manual charging options: a. Using the adapter only, plugged directly into the DC socket (located next to the ON/OFF switch), or b. With the adapter connected to the charging station, place vacuum onto the charging station. NOTE: The vacuum will charge when the Power switch is in the ON or OFF position. NOTE: The power indicator light will flash when the vacuum is charging.
- Page 9 UV lamp (located on the under side of the vacuum) The UV lamp will illuminate blue and automatically operate once the R-Vac Pet starts vacuuming. As the R-Vac Pet vacuums, the UV lamp pans over the surface, sterilising and disinfecting the floor and killing bacteria. Wipe the lens of the UV lamp clean after each use with a soft cloth.
-
Page 10: Remote Control & Programming
REMOTE CONTROL & PROGRAMMING: TIMER The Remote control is synchronised with your vacuum cleaner prior to purchase. REMOTE CONTROL: BATTERY INSTALLATION & REPLACEMENT 1. Open the cover on the back of the Remote control. 2. Insert AAA batteries (not included) with correct polarity as marked (+/-). Replace the cover on the back of the Remote control. IMPORTANT: Remove the batteries if the Remote control will not be used for an extended period of time. - Page 11 FUNCTIONS OF THE REMOTE CONTROL: To set the current time: NOTE: The Remote control uses 24 Hour time only. During set up, press the button to quit at any time. To set the correct time - Press the TIMER button. The 1 ‘time’ digit will flash. Use the “˄” and “˅” to change the number. 3. Press the “˂” “˃”buttons to scroll left and right, and change the Hour and Minutes using the “˄” and “˅”...
-
Page 12: Space Isolator
5. Press the SET button, then press “<”. 6. The square around a number at the top of the screen will then begin to flash. 7. Press the “˄” and “˅” buttons to scroll through the weekdays. 8. Select the days you would like to schedule your vacuum to clean by pressing the OK button; this will underline your number. Alternatively, press the ALL button if you would like to schedule the vacuum to clean every day. IMPORTANT: Your R-Vac Pet will continue to clean at the scheduled time, even if the bin is full or the brushes require cleaning. - Page 13 SPACE ISOLATOR: BATTERY INSTALLATION & REPLACEMENT 1. Open the cover on the base of the Space Isolator. 2. Insert AA batteries (not included) with correct polarity (+/-). Replace the cover on the base of the Space Isolator. IMPORTANT: Remove the batteries if the Space Isolator will not be used for an extended period of time. If your Space Isolator isn’t operating correctly, it may be necessary to re-synchronise it with the R-Vac Pet using the following steps: 1. Firstly, turn the power switch on the side of the R-Vac Pet OFF.
-
Page 14: Charging Station
CHARGING STATION: Docking Station： indicator Infrared signal transmitting window Internal synchronise button (on back of charging station) Charging electrode DC socket The Charging Station is synchronised with your vacuum cleaner prior to purchase. Automatic Charging: Position the Charging Station on a hard, level surface against a wall. Figure 1 High Voltage! Electrical hazard! Please dry your hands before plugging in. -
Page 15: Maintenance
Place your R-Vac Pet on the Charging Station with the silver auto-charging electrodes on the front of the R-Vac Pet in contact with the silver charging electrodes on the Charging Station. IMPORTANT: Place the Charging Station securely against the wall, or it might be moved by the vacuum, making it difficult for the cleaner to dock and charge. - Page 16 CLEANING THE DUST BIN: Slide Clip Remove the dust bin. Press the two side clips (see Figure 1) on the dust bin to release the gate. Clear cover Push the gate open and pour out the dust. Rubber cleaning head Push on the rubber strip to open the clear cover.
- Page 17 3. Reinstall the filter in the original position. Tip: The rubber cleaning head may fall off when you clean the dust bin. Reinstall as shown below: Rubber cleaning head Figure 1 Figure 2 Figure 3 Rubber cleaning head Position the dust bin and rubber cleaning head as per Figure 1. Place one end of the cleaning head onto the clear cover of the dust bin, make sure the rubber on the cleaning head is facing upwards and connect it with the dust bin.
-
Page 18: Trouble Shooting
REMOVING, REPLACING AND CLEANING UNDER THE SIDE BRUSH: Using a screw driver, release the screw in the main shaft of the side brush. (see Figure 4) Remove the side brush and clean the cavity with the dust cleaning brush. 3. Place the side brush back into position and refit the screw. Figure 4 REMOVING, REPLACING AND CLEANING THE FRONT WHEEL: 1. Remove the entire front wheel assembly: using a flat head screw driver, from the front of... - Page 19 IMPORTANT SAFEGUARDS Basic safety precautions should always be followed including but not limited to the following: 1. To protect against electrical hazards, do not immerse the power adaptor, R-Vac Pet or any of the associated accessories in water or any other liquid. 2.
- Page 20 RUSSELL HOBBS and logo are Trade Marks of Spectrum Brands, Inc., or one of its subsidiaries. Manufactured in China to Spectrum Brands specifications. ©2013 Spectrum Brands, Inc.