Russell Hobbs RHSV1801 Manual page 13

USING YOUR TURBO VAC
Emptying the dust container
When the dust container starts to fill it will need to be emptied. This
will help it to maintain suction performance.
1. To remove the dust container, press the release button located just
above where the container is attached.
2. Pull the dust container away from the unit.
3. Over a bin, remove the whole filter and tap off the trapped dirt. Tip
the container upside down to empty the contents. You may need to
tap the sides to dispose of all of the dirt.
4. Place the filter back into the dust container in the direction
indicated by the diagram.
Important:
You may wish to empty the dust container outdoors as emptying may
create a dust cloud.
5. Place the assembled dust container back onto the unit, until it
secures into place.
1
3
2
4
13