Russell Hobbs RHSV1801 Manual page 12

Turbo vac pro 18v 2 in 1 cordless cleaner
Table of Contents

Advertisement

USING YOUR TURBO VAC - HANDHELD
1. To convert from full sized vac to handheld cleaner, make sure the
unit is stood in the upright position and press in the handheld vac
release button. Ensure you are holding the handheld unit handle so
that it can be pulled out safely.
2. Attach the tool of choice by slotting it into the suction inlet of the
handheld unit, with the clear side facing upwards. To remove the
tool, pull away from the inlet to slide it out.
The crevice tool can be attached for cleaning hard to reach
areas, such as sofas, cobwebs high up or down to skirting.
The brush tool is ideal for cleaning upholstery and stairs.
3. To start cleaning, press down the handheld unit power switch.
4. Move the cleaner suction inlet over the areas you would like to
clean, avoiding any liquids and large or sharp objects.
1
3
2
4
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

Turbo vac pro

Table of Contents