Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Russell Hobbs RHSV1801
Summary of Contents for Russell Hobbs RHSV1801
- Page 1 Turbo Vac Pro 18V 2 in 1 Cordless Cleaner Model Number: RHSV1801 For Customer Services & Spare Parts please call 0345 209 7461 Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm Or visit us at www.productcare.co.uk...
-
Page 2: Table Of Contents
CONTENTS Page(s) Safety instructions Turbo Vac feature diagram Turbo Vac assembly Charging your Turbo Vac Using your Turbo Vac 11-13 Cleaning and care 14 & 16 Wall mounting your Turbo Vac Problem solving Guarantee and customer services Spare parts Connection to the mains supply 20-21 Disposal information Thank you for purchasing your Turbo Vac Pro 18V 2 in 1 Cordless Cleaner. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING: • It is hazardous for anyone other than a competent person to carry out any service or repair operation that involves the removal of a cover which gives protection against exposure to electrical parts. - Page 4 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING: • Do not attempt to use the charger with any other product nor attempt to charge this product with another charger • Do not abuse the charger cord; never carry the charger or base by the cord or pull cord to disconnect from an outlet;...
- Page 5 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING: • Children should be supervised to ensure they don’t play with the appliance. • Use only as described and for the uses described in this manual • Do not use the charger if power cord or plug has been damaged.
- Page 6 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE • Do not attempt to empty dust container while unit is running, always turn off the appliance and unplug before emptying/replacing the dust container. • Turn off sweeper before clearing debris from floor brush assembly •...
-
Page 7: Turbo Vac Feature Diagram
TURBO VAC FEATURE DIAGRAM Main unit power switch Floor head release Wall mounting screws button Handle release button Floor head Wall plugs Handheld vac release Main handle Crevice tool button Handheld vac power switch Handheld handle Brush tool Charging indicator light Handheld vacuum Charging cable Dust container release... -
Page 8: Turbo Vac Assembly
TURBO VAC ASSEMBLY Before using your cleaner Remove all packaging and lay out the separate components. Check the unit after unpacking for any visual damage such as: • Misaligned or damaged parts • Damage to the main body and separate components •... - Page 9 TURBO VAC ASSEMBLY Ensure the power is switched off before assembling. 1. Insert the assembled handheld vacuum unit into the main frame as shown in the diagram - suction inlet first then pushing the unit forward to lock into place. 2.
-
Page 10: Charging Your Turbo Vac
CHARGING YOUR TURBO VAC Before using for the first time you will need to charge the cleaner. The charger can be used either fitted to the wall or mounted on its floor support. Refer to page 15 for wall mounting instructions. 1. -
Page 11: Using Your Turbo Vac
USING YOUR TURBO VAC Once assembled and charged: 1. Lift the vac off the charging dock and place on the floor. 2. Support the floor head with your foot and pull back the handle 3. Press the main unit power switch downwards to start the power. This will illuminate the power indicator light on the floor head. - Page 12 USING YOUR TURBO VAC - HANDHELD 1. To convert from full sized vac to handheld cleaner, make sure the unit is stood in the upright position and press in the handheld vac release button. Ensure you are holding the handheld unit handle so that it can be pulled out safely.
- Page 13 USING YOUR TURBO VAC Emptying the dust container When the dust container starts to fill it will need to be emptied. This will help it to maintain suction performance. 1. To remove the dust container, press the release button located just above where the container is attached.
-
Page 14: Cleaning And Care
CLEANING AND CARE: CLEANING THE FILTER It is necessary to clean the filters regularly with frequent use in order to maintain suction performance and prolong the life span of your cleaner. 1. Follow steps 1 to 3 on page 13. 2. -
Page 15: Wall Mounting Your Turbo Vac
WALL MOUNTING YOUR TURBO VAC What you will need Use the three wall mounting screws and three wall plugs provided with the product (under the stand floor support.) You will also require: a drill with an 6mm masonry drill bit, a sharp pencil, a screw driver, a hammer and, ideally, a spirit level. - Page 16 CLEANING AND CARE Before you clean the appliance, make sure the power is switched off and that the unit is not on the charging stand. It is recommended to store the appliance on the charging stand. Do not leave plugged in for extended periods of time. You can fold the handle by pressing in the handle release button and folding backwards.
-
Page 17: Problem Solving
PROBLEM SOLVING PROBLEM POSSIBLE PROBLEM POSSIBLE SOLUTION The cleaner hasn’t had Make sure you have plugged in the cleaner to charge for enough charge 14-16 hours. The light will illuminate when charging. The cleaner won’t Charging cable is Make sure there is no signs of damage to the charging turn on damaged cable. -
Page 18: Guarantee And Customer Services
GUARANTEE AND CUSTOMER SERVICES At Russell Hobbs, we take all our customer feedback seriously. Feel free to contact our Product Care Team, on 0345 209 7461 Monday – Friday: 8am-8pm & Saturday: 9am – 1pm, who will be more than happy to assist you. -
Page 19: Spare Parts
SPARE PARTS To check the availability of the following spare parts, simply contact our friendly Customer Services team using the details provided at the bottom of this page. Dust container Crevice tool Dust container filters Brush tool Charging stand Charging cable For Customer Services &... - Page 20 0345 209 7461 Opening times: Monday - Friday 8am – 8pm & Saturday 9am –1pm Or visit us at www.productcare.co.uk Revision 2.1 Model: RHSV1801 Produced for: G2S Ltd, Wigan, WN2 4AY This symbol is known as the 'Crossed-out wheelie bin Symbol'.