fantastic furniture Haywood Desk 2 Drawer Manual page 7

Step 5
You will need
1 x Dowel
4 x Cam Nuts
(H1)
(H4)
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 4 x Cam Nuts (H4) into Rail (P5) and Back Panel (P4) as shown. Rotate the cam nuts so
the arrows point towards the incoming cam bolts. Attach Rail (P5) and Back Panel (P4) to Left
Side Panel (P2) by tightening all cam nuts with the Phillips Head Screwdriver. Insert 1 x Dowel (H1)
into Rail (P7) as shown. Attach Rail (P7) to Left Side Panel (P2).
Step 6
You will need
1 x Dowel 4 x Cam Nuts
(H1) (H4)
Phillips Head
Screwdriver
Insert 1 x Dowel (H1) into Rail (P7) as shown. Insert 4 x
Cam Nuts (H4) into Rail (P5) and Back Panel (P4). Rotate the cam nuts so the arrows point
towards the incoming cam bolts. Attach Rail (P5) and Back Panel (P4) to Right Side
Panel (P3) by tightening all cam nuts with the Phillips
Head Screwdriver.
fantasticfurniture.com.au
(P4)
(P5)
(P2)
(P3)
(P5)
(P7)
(P4)
(P7)
Page 7