fantastic furniture Haywood Desk 2 Drawer Manual page 10

Step 11
You will need
Phillips Head
8 x Small Cam
Screwdriver
Bolts (H13)
Attach 8 x Small Cam Bolts (H13) to Drawer Fronts (P8 & P13) by tightening with
the Phillips Head Screwdriver.
Step 12
You will need
8 x Small Cam Phillips Head
Nuts (H14) Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 8 x Small Cam Nuts (H14) into
Left & Right Drawer Sides (P9x2 & P10x2)
as shown. Rotate the cam nuts so the
arrows point towards the incoming
cam bolts. Attach Left & Right Drawer
Sides (P9x2 & P10x2) to Drawer Fronts
(P8 & P13) by tightening the cam nuts with the Phillips Head Screwdriver.
fantasticfurniture.com.au
(P8) & (P13)
(P9)
(P8) & (P13)
(P10)
Page 10