Page 4
Tabletop (P1) Other tool you need: Phillips head Screwdriver Support Bar (P3) Table Leg (P2) Table Leg (P2) Support Bar (P4) Box 1: Tabletop(P1) x1; Table Legs(P2) x 2; Support Bar (P3) x1; Support Bar (P4) x 1 5 x Short Bolts 1 x Allen Key 4 x Long Bolts 2 x Screws (H3)
Page 5
(P2) (P1) 1 x Allen Key 4 x Long Bolts (H4) (H2) (H2) (H4) (H2) Attach Table Leg (P2) to Tabletop (P1) with 2 x Long Bolts (H2) by tightening with the Allen Key (H4). Repeat steps to attach the second Table Leg (P2). (H1) (H1) (H4)
Page 6
Step 3 Phillips head 2 x Screws (H3) Screwdriver (H3) (H3) Secure the Tabletop (P1) to the Table Legs (P2x2) with 2 x Screws (H3) by tightening with the Phillips Head Screwdriver. Step 4 (H5) (H5) (H5) Levelling Feet (H5) (H5) (H5) Screw in 4 x Levelling Feet (H4) to the bottom of Table Legs (P2x2).