Page 1
ELLIS BEDSTEAD PLEASE READ this sheet prior to assembly to familiarise yourself with the various stages of construction. Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not destroy any of the packaging until you are certain that you have all the necessary parts for the assembly.
Page 2
Fittings Checklist HARDWARE NEEDED FOR BED ASSEMBLY (PACK A) Code Description Code Description Bolts (M8x30mm) for Flat Washers (for M8 bolts) fitting side panels (3&4) & (1&2) Allen Key (for M8 bolt) Spring Washers (for M8 bolts) HARDWARE FOR FITTING WOOD SLATS OR UPGRADED SPRUNG SLAT FRAME (PACK B) Code Description Code...
Page 3
Bed Assembly - Use Pack 'A' Stage 10mm & 10mm Page 3 of 6...
Page 4
Bed Assembly - Use Pack 'A' Stage & & 100% Page 4 of 6...
Page 5
Fitting Wooden Slat Set - Use Pack 'B' Stage Carefully lay the wooden slat set on the metal supports, on each side panel. iii) Adjustable foot Page 5 of 6...
Page 6
Fitting Sprung Slat Frame - Use Pack 'B' Stage Page 6 of 6...
Need help?
Do you have a question about the ELLIS BEDSTEAD and is the answer not in the manual?
Questions and answers