Page 1
JAKARTA BEDSTEAD PLEASE READ this sheet prior to assembly to familiarise Double Size yourself with the various stages of construction. Carefully open the pack supplied and check the contents against the parts and fittings check list. Do not destroy any of the packaging until you are certain Single Size that you have all the necessary parts for the assembly.
Page 2
Fittings Checklist HARDWARE NEEDED FOR CORNER BRACKET AND FEET ASSEMBLY (PACK A) Code Description Code Description Bolts (M8x25mm) for fitting bracket (5a&5b) to Allen Key (for M8 bolt) & & and to side panel s (3&4) Screws (4x25mm) for fitting feet (6a&6b) to Spring Washers (for M8 bolts) headboard &...
Page 3
Side Panel Assembly - Use Pack 'A' Stage & & Side Panel Assembly - Use Pack 'B' Stage Page 3 of 10...
Page 4
Side Panel Assembly - Use Pack 'B' Stage Side Panel Assembly - Use Pack 'B' Stage Page 4 of 10...
Side Panel Assembly - Use Pack 'B' Stage Centre Support Bar Assembly - Use Pack 'C' Stage DOUBLE SIZE Page 5 of 10...
Page 6
Bed Assembly - Use Pack 'A' Stage & 10mm & Page 6 of 10...
Page 7
Bed Assembly - Use Pack 'C' Stage DOUBLE SIZE Footboard (2) Headboard (1) 100% Make certain the bed is squared up as shown in the diagram then tighten all bed assembly bolts 100%. Page 7 of 10...
Page 8
Bed Assembly - Use Pack 'A' Stage SINGLE SIZE 100% Make certain the bed is squared up as shown in the diagram then tighten all bed assembly bolts 100%. Page 8 of 10...
Page 9
Bed Assembly - Use Pack 'B' Stage DOUBLE SIZE Bed Assembly - Use Pack 'B' Stage SINGLE SIZE Page 9 of 10...
Page 10
Fitting Slats FOLLOW F OR DOUBLE SIZE BEDSTEAD Stage Fit slats (12) to double plastic cap (14). Fix single plastic caps (13) on each end. Connect set onto centre support bar (15&16) & metal support rails of side panels (3&4) - align the lugs &...
Need help?
Do you have a question about the JAKARTA and is the answer not in the manual?
Questions and answers