Table of Contents
Advertisement
CLEANING
Isolate from the power supply and allow to cool.
Do not use a water jet or steam cleaner, and do not immerse this appliance.
Clean all panels with warm water and mild detergent, do not use abrasive
materials. Do not wet electrical components. Dry with a soft cloth.
Clean the ceramic glass with a scraper or Vileda CERAN cleaning sponge – use a
few drops of a suitable cleaner on a paper towel or the rough side of the sponge.
Wipe with a damp cloth and dry with a clean cloth.
Check the air filter and replace if contaminated (see Component Replacement).
Plastic, aluminium foil or sugary food must be scraped of the ceramic glass
immediately. If these substances melt they can damage the surface.
IS 781 ECN 4833
Page 10 of 13
Advertisement
Table of Contents
