Installing The Seat - Briggs & Stratton Axion 150Z Series Setup Instructions

Installing the Seat

1. Raise the seat base.
2. Align the holes in the seat bottom with the holes in the
seat base.
3. Secure the seat to the seat base with two 5/16-18 x
3/4 serrated head bolts for the rear seat slots, and two
5/16-18 x 3/4 shoulder bolts for the front slots. See
Figure 5.
4. Torque to 14-19 ft. lbs. (19-25 N.m.) See Figure 5.
Figure 5. Installing the seat
5/16-18 x 3/4
5/16-18 x 3/4
5
Axion / 150Z Series
19-25 Nm
14-19 ft-lbs