Remote Management - NETGEAR CG4500BDv2 User Manual


To delete an IP address from the DHCP Client Lease Info table:
1. In the DHCP Client Lease Info table, select the radio button for the MAC and IP address
that you want to remove.
2. Click Delete.
The information for the selected MAC and IP address is removed from the DHCP Client
Lease Info table.
To remove all information from the DHCP Client Lease Info table, click Clear DHCP
Leases.

Remote Management

With remote management, you can allow a user or users on the Internet to configure,
upgrade, and check the status of the gateway.
Note: Use secure passwords if you enable remote management.
Passwords should contain no dictionary words from any language,
and should be a mixture of letters (both uppercase and lowercase),
numbers, and symbols. Your password can be up to 16 characters.
To manage this gateway through the Internet, you need its public IP address, as seen from
the Internet. Your ISP allocates this public IP address. But if your ISP account uses a
dynamic IP address, the address can change each time you connect to your ISP. This
problem has two solutions:
• Have your ISP allocate you a fixed IP address.
• Use the DDNS (Dynamic DNS) feature so you can connect using a domain name, rather
than an IP address.

To configure the gateway for remote management:
1. In the main menu, under Advanced, select Remote Management.
NETGEAR DOCSIS 3.0 N900 Wireless Data Gateway
Advanced Settings
38