Ip Filtering - NETGEAR CG4500BDv2 User Manual

• Time of Day to Block. You can specify the time of day to block the computer. The
default is All Day. Be sure that you clear the All Day check box if you want to enter
specific times. The selected period applies to each day that you selected.
5. Click Apply.
6. Repeat these steps for all computers that you want to block.

To stop blocking a computer:
1. In the MAC Filter List, select the computer.
2. Clear its Enable check box.
The computer remains in the list however it is not blocked.
3. Click Apply.

To remove a computer from the list:
1. In the MAC Filter List, select the computer.
2. Click Delete.
3. Click Apply.

IP Filtering

By default, any computer is allowed access to the Internet through your gateway. You can
use IP filtering to block specific computers based on their IP addresses from access to the
Internet on selected days and times.

To set up IP filtering:
1. In the main menu, under Advanced, select
IP Filtering.
The Trusted Devices table shows computers
that are allowed access to the Internet
through your gateway.
2. Add device to the IP Filter List as needed:
• If the computer appears in the Trusted
Devices table, select its radio button to
capture its IP address.
If the computer you want is not listed,
click Refresh to update the Trusted
Devices table.
• If no device name appears, you can type
a name for the computer you are adding;
or enter the IP address of the computer
you want to block.
3. Click Add.
NETGEAR DOCSIS 3.0 N900 Wireless Data Gateway
Advanced Settings
31