Adding or Replacing the Computer or Devices
1. Press the
button for more than 3 seconds to disable a Wi-Fi and AP mode connection.
light and
The
Note:
Press the
button to re-connect Wi-Fi and AP mode.
Restoring the Network Settings from the Control
Panel
You can restore all network settings to their defaults.
1. Turn the scanner off.
2. While holding down the
The
light and
light turn off when these are disabled.
button, press the
light flash alternately and then turn off when restoration is complete.
>
Restoring the Network Settings from the Control Pa
button until
light and
185
light turn on simultaneously.
...