Connecting Through Bluetooth; Configuring Hpt204Bt - Javad HPT204BT Series Operator's Manual

Configuration

Configuring HPT204BT

Connecting through Bluetooth®

2.4.3. Connecting through Bluetooth

Note:
Do not forget to attach the Bluetooth
modem.
The HPT204BT modem contains Bluetooth
the modem and any other external device that supports Bluetooth
IPAQ, or a computer with USB-to-Bluetooth
HPT204BT and external device connection procedure varies slightly depending on the type of external
device used. In general, the connection procedure is as follows:
Note:
Refer to your Bluetooth
information.
1. Turn on a Bluetooth
mode is Master; the modem's Bluetooth
2. Instruct the external device (Master) to search for the modem (Slave).
3. Once the Master device detects the modem, use the procedure described in the external device's
documentation to connect it with the modem.
2.5. Configuring HPT204BT
1. Connect the computer and HPT204BT, as described in "Connecting HPT204BT and Computer"
on page 17.
2. Turn on the modem.
3. Start ModemVU.
4. Select the HPT204BT in the Options window, and click OK:
5. Select the COM port the HPT204BT modem is connected to. Click Connect.
18
®
antenna to Bluetooth antenna connector on the back panel of the
®
wireless technology that allows synchronization between
®
adapter or PCMCA-to-Bluetooth
®
-enabled external device documentation for more detailed connection
®
-enabled external device and your receiver. The default external device
®
module mode is Slave.
®
®
wireless technology; for example, an
®
adapter installed, etc.
www.javad.com