Advertisement
All manuals and user guides at all-guides.com
Quick tour
Status LEDs
The following section describes the status indicators and
connectors applicable to G.SHDSL.
These indicators report the status of the application. The func-
tion of each LED is described in
Table 6
Status LEDs
LED
Function
Sync
A two-color LED that reports the status of
modem synchronization.
–
–
–
Data
A two-color LED that reports the status of the
data connection.
–
–
–
Error
A two-color LED that reports modem errors.
–
Alarm
A two-color
tions.
–
–
HST-3000 G.SHDSL Testing User's Guide
Table
Flashing green indicates that the modems
are training.
Solid green indicates that the modems have
synchronized.
Solid red indicates a synchronization error
has occurred.
Flashing green indicates that the data con-
nection is not yet established.
Solid green indicates that a data connection
has been established with the network (so
that the HST-3000 may send and receive
data on the network).
Solid red indicates that a data connection
error.
Solid red indicates an error condition.
LED that indicates alarm condi-
Solid red indicates a local alarm condition.
Solid amber indicates a remote alarm condi-
tion.
Chapter 1 Getting Started
Quick tour
6.
3
Advertisement
