Advertisement
Quick tour
Status LEDs
The following section describes the status indicators and
connectors applicable to G.SHDSL.
These indicators report the status of the application. The func-
tion of each LED is described in
Table 6
Status LEDs
LED
Function
Sync
A two-color LED that reports the status of
modem synchronization.
– Flashing green indicates that the modems
– Solid green indicates that the modems have
– Solid red indicates a synchronization error
Data
A two-color LED that reports the status of the
data connection.
– Flashing green indicates that the data con-
– Solid green indicates that a data connection
– Solid red indicates that a data connection
Error
A two-color LED that reports modem errors.
– Solid red indicates an error condition.
Alarm
A two-color
tions.
– Solid red indicates a local alarm condition.
– Solid amber indicates a remote alarm condi-
HST-3000 G.SHDSL Testing User's Guide
Table
are training.
synchronized.
has occurred.
nection is not yet established.
has been established with the network (so
that the HST-3000 may send and receive
data on the network).
error.
LED that indicates alarm condi-
tion.
Chapter 1 Getting Started
Quick tour
6.
3
Advertisement
