Newland SPEEDATA SD35 User Manual page 21

SD35 User guide V1.0
More settings
Click "Settings"-"Scan" to slide to the bottom, and click "More".
Show scan hand type.And can check update after connecting to
Check update:
the internet.
Note: "Check update"requires the scanning service version 5.1 or higher.
This is used to set a custom broadcast.
Custom broadcast:action:
This is used to set a custom broadcast
Custom broadcast barcode:key:
content.
This is used to set a custom broadcast type.
Custom broadcast type:key:
Output analog keyboard.Cannot be used
Analog keyboard output:
simultaneously with Output o cursor.
Delete thebarcode content of the original scan result
Overwrite last scan result:
and add the new barcode content of the scan result.
Decoding area:the center area after opening,the normal area
Center decoding:
after closing;That is ,when scanning dense barcode,the result of outputting
barcode is at the center position of the laser.
Obtain and update scan head firmware after connecting to
Firmware update:
the internet.
Note:please use "Firmware Update" under the guidance of the manufacturer.
Do not try it yourself.
21