Mercedes-Benz C-Clas 2016 Owner's Manual page 96

Convenience closing feature: touch the
X
recessed sensor surface : on the door han-
dle until the side windows are fully closed.
i
Make sure you touch only the recessed sen-
sor surface :.
To interrupt convenience closing: release
X
recessed sensor surface : on the door han-
dle.
Problems with the side windows
G
WARNING
If you close a side window again immediately after it has been blocked or reset, the side window
closes with increased or maximum force. The reversing function is then not active. Parts of the
body could be trapped in the closing area in the process. This poses an increased risk of injury or
even fatal injury.
Make sure that no parts of the body are in the closing area. To stop the closing process, release
the switch or push the switch again to reopen the side window.
Resetting the side windows
If a side window can no longer be closed fully,
you must reset it.
Close all doors.
X
Turn the key to position 1 or 2 in the ignition
X
lock.
Close the soft top (
X Y
Pull the corresponding switch on the door
X
control panel until the side window is com-
pletely closed ( page 91).
Y
Hold the switch for an additional second.
X
If the side window opens again slightly:
Immediately pull the corresponding switch on
X
the door control panel until the side window is
completely closed (
Y
Hold the switch for an additional second.
X
If the corresponding side window remains
X
closed after the button has been released, the
side window has been reset correctly. If this is
not the case, repeat the steps above again.
Side windows
page 95).
page 91).
Z
93