Table of Contents
Advertisement
Folding the rear seat backrest forwards
Vehicles without memory function: if neces-
X
sary, move the driver's or front-passenger
seat forwards.
Vehicles with memory function: when one or
X
both parts of the rear seat backrest are folded
forwards, the respective front seat moves
forward slightly, when necessary, in order to
avoid contact.
Open the boot.
X
Press the right or left button : on the rear
X
seat backrest.
The corresponding rear seat backrest is
released.
Fold corresponding rear seat backrest ; for-
X
wards.
Move the driver's or front-passenger seat
X
back if necessary.
Folding the rear seat backrest back
!
Make sure that the seat belt does not
become trapped when folding the rear seat
backrest back. Otherwise, it could be dam-
aged.
Left- and right-hand seat backrest
Move the driver's or front-passenger seat for-
X
wards if necessary.
Fold rear seat backrest : back until it
X
engages.
If the rear seat backrest is not engaged and
locked, this will be shown on the multifunc-
tion display on the instrument cluster. A warn-
ing tone also sounds.
If you do not need the through-loading feature,
you should always engage the rear seat backr-
ests. This will prevent unauthorised access to
the boot from the vehicle interior.
Securing a load
Lashing eyelets
Observe the following notes on securing loads:
Observe the loading guidelines (
R
Secure the load using the lashing eyelets.
R
Distribute the load on the lashing eyelets
R
evenly.
Do not use elastic straps or nets to secure a
R
load. These are intended only as anti-slip pro-
tection for light loads.
Do not route lashing materials across sharp
R
edges or corners.
Pad sharp edges for protection.
R
Stowage areas
page 296).
Y
Z
299
Advertisement
Table of Contents
