Table of Contents
Advertisement
Menus and submenus
236
Setting the dipped-beam headlamps for
driving on the left/right
This function is only available in vehicles with
the Intelligent Light System.
You can use this function to switch between
symmetrical and asymmetrical dipped beam
(
page 114).
Y
Press ò on the steering wheel to open the
X
menu list.
Press : or 9 on the steering wheel to
X
select the
Settings
Settings
Confirm by pressing a on the steering
X
wheel.
Press : or 9 to select the
X
submenu.
Press a to confirm.
X
Press : or 9 to select the
X
beams Setting for
beams Setting for
You will see the selected setting,
side traffic
side traffic
Press the a button to save the setting.
X
If you change the setting, conversion does not
take place until the next time the vehicle is
stationary.
If you set the dipped-beam headlamps for driv-
ing on the right/left, then motorway mode and
the extended range foglamps are unavailable.
These are only deactivated if the setting for driv-
ing on the left/right is set opposite to your vehi-
cle's country version.
A qualified specialist workshop can set the
dipped-beam headlamps for driving on the left/
right.
Instrument cluster submenu
Selecting the unit of measurement for dis-
tance
The
Display
Display unit
unit Speed-/odometer
allows you to choose whether certain displays
appear in kilometres or miles in the multifunc-
tion display.
Press ò on the steering wheel to open the
X
menu list.
Press the : or 9 button on the steering
X
wheel to select the
Confirm by pressing a on the steering
X
wheel.
Use : or 9 to select the
X
cluster
cluster
submenu.
menu.
Lights
Lights
Dipped
Dipped
function.
right-
right-
or
left-side
left-side traffic
traffic.
Speed-/odometer
function
Settings
Settings
menu.
Instrument
Instrument
Press a to confirm.
X
Press : or 9 to select the
X
unit Speed-/odometer
unit Speed-/odometer
The current setting
Press the a button to change the setting.
X
The selected unit of measurement for distance
applies to the:
digital speedometer in the
R
total distance recorder and the trip meter
R
trip computer
R
current consumption and the range
R
range
R
navigation instructions in the
R
cruise control
R
SPEEDTRONIC
R
DISTRONIC PLUS with Steering Assist and
R
Stop&Go Pilot
ASSYST PLUS service interval display
R
Switching the additional speedometer
on/off
United Kingdom: this function is unavailable.
The additional speedometer is always switched
on.
If the additional speedometer is switched on,
the speed is shown in the status bar of the mul-
tifunction display instead of the outside tem-
perature.
The speed display is inverse to your speedome-
ter.
Press ò on the steering wheel to open the
X
menu list.
Press : or 9 on the steering wheel to
X
select the
Settings
Settings
Confirm by pressing a on the steering
X
wheel.
Press : or 9 to select the
X
ment cluster
ment cluster
submenu.
Press a to confirm.
X
Using : or 9, select the
X
speedo [km/h]
speedo [km/h]
function.
The current selection appears.
To activate/deactivate: press a again.
X
Display
Display
function.
km km
or
Miles
Miles
appears.
Trip
Trip
menu
Navi
Navi
menu
menu.
Instru‐
Instru‐
Digital
Digital
Advertisement
Table of Contents
