Table of Contents
Advertisement
Convertible top
98
Fitting/removing the folding draught
stop
Fitting
The folding draught stop is stored in a bag. The
bag is attached with a securing strap to the
through-loading facility behind the rear seats.
If you wish to use the through-loading facility,
loosen the securing strap attached to the
through-loading facility and stow the folding
draught stop in the boot. Use the securing strap
to fasten the bag to one of the luggage hooks in
the boot.
Open all side windows and the soft top.
X
Fold the rear seats forward (
X
remove the bag containing the folding
draught stop.
Remove the folding draught stop from the
X
bag.
Fold out the folding draught stop : as
X
shown.
Fold out the two brackets ; to the left and
X
right.
X
page 299) and
Y
Perform the following steps in sequence on both
sides of the vehicle:
X
X
X
Removing
X
X
Align the brackets ; of the folding draught
stop : with the two rear fixtures = on the
vehicle.
Pull the handle ? in the direction of the
arrow.
Align the folding draught stop : with the side
fixture A on the vehicle from above and
insert.
Push the handle ? on the folding draught
stop : back as far as it will go.
The folding draught stop : is locked.
Pull the handles ? on the left and right one
after the other and slide the folding draught
stop : out of fixture A from above.
The folding draught stop : is unlocked.
Pull the folding draught stop : out of the two
rear fixtures =.
Advertisement
Table of Contents
