Table of Contents
Advertisement
Driving systems
200
Red guide line at a distance of approximately
A
0.30 m from the front of the vehicle
B
Yellow guide line at a distance of approx-
imately 1.0 m from the front of the vehicle
Top view and enlarged rear view
Symbol for the split-screen setting with top
:
view and reversing camera image enlarged
Red guide line at a distance of approximately
;
0.30 m from the rear of the vehicle
This view assists you in estimating the distance
to the vehicle behind you.
i
This setting can also be selected as an
enlarged front view.
Top view with image from the side cam-
eras
:
Symbol for the top view setting with the
forward-facing side camera image
Yellow guide line for the vehicle width
;
including the exterior mirror (right side of
vehicle)
Yellow guide line for the vehicle width
=
including the exterior mirror (left side of
vehicle)
i
You can also select the side camera setting
for the rear-facing view.
"Coupling up a trailer" function
Vehicle centre point on the yellow guide line
:
at a distance of approximately 1.0 m from
the rear of the vehicle
Trailer drawbar
;
Red guide line at a distance of approximately
=
0.30 m from the rear of the vehicle
Set the height of trailer drawbar ; so that it
X
is slightly higher than the ball coupling.
Position the vehicle centrally in front of trailer
X
drawbar ;.
For technical reasons, the ball coupling B of
the trailer tow hitch on the multimedia system
display is either only partially visible or not visi-
ble at all.
Select symbol ? using the controller.
X
The "Coupling up a trailer" function is selec-
ted. The distance specifications now apply
only to objects that are at the same level as
the ball coupling.
Reverse carefully, making sure that trailer
X
drawbar locating aid A points approximately
in the direction of the trailer drawbar.
Advertisement
Table of Contents
