Table of Contents
Advertisement
Automatic anti-dazzle mirrors
G
WARNING
Electrolyte may escape if the glass of an auto-
matic anti-dazzle mirror breaks. Electrolyte is
harmful and causes irritation. It must not
come into contact with your skin, eyes, res-
piratory organs or clothing or be swallowed.
There is a risk of injury.
If you come into contact with electrolyte,
observe the following:
immediately rinse off electrolyte from your
R
skin with water.
immediately and thoroughly rinse electro-
R
lyte out of eyes using clean water.
if electrolyte is swallowed, immediately
R
rinse out your mouth thoroughly. Do not
induce vomiting.
if electrolyte comes into contact with skin
R
or eyes or is swallowed, seek medical atten-
tion immediately.
immediately change out of clothing that has
R
been in contact with electrolyte.
if an allergic reaction occurs, seek medical
R
attention immediately.
The exterior mirror on the driver's side and the
rear-view mirror automatically go into anti-daz-
zle mode if:
the ignition is switched on
R
incident light from headlamps strikes the sen-
R
sor in the rear-view mirror
The mirrors do not dip if reverse gear is engaged
or if the interior lighting is switched on.
Parking position for the exterior mir-
ror on the front-passenger side
Storing the parking position
You can set the front-passenger-side exterior
mirror such that you can see the rear wheel on
that side as soon as you engage reverse gear.
You can store this position.
Storing using reverse gear
Memory button M
:
Button for the exterior mirror setting
;
Button for the exterior mirror on the front-
=
passenger side
?
Button for the exterior mirror on the driver's
side
Start the engine.
X
Press button =.
X
Engage reverse gear.
X
The exterior mirror on the front-passenger
side moves to the preset parking position.
Use button ; to adjust the exterior mirror to
X
a position that allows you to see the rear
wheel and the kerb.
The parking position is stored.
i
If you shift the gears to another position, the
exterior mirror on the front-passenger side
returns to the driving position.
Storing using the memory button
You can store the parking position of the front-
passenger-side exterior mirror using memory
button M :. Reverse gear must not be
engaged.
Turn the key to position 2 in the ignition lock
X
(
page 133).
Y
Press button =.
X
Use button ; to adjust the exterior mirror to
X
a position that allows you to see the rear
wheel and the kerb.
Press memory button M : and one of the
X
arrows on button ; within three seconds.
The parking position is stored if the exterior
mirror does not move.
Mirrors
111
Z
Advertisement
Table of Contents
