Download Print this page
Petsafe SmartDoor MPA11-12019 Installation Manual
Petsafe SmartDoor MPA11-12019 Installation Manual

Petsafe SmartDoor MPA11-12019 Installation Manual

Wall entry conversion kit - small pet door

Advertisement

Quick Links

PetSafe
®
SmartDoor
Wall Entry
Conversion Kit - Small
Pet Door
Installation Guide
Please read this entire guide before beginning

Advertisement

loading
Need help?

Need help?

Do you have a question about the SmartDoor MPA11-12019 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Petsafe SmartDoor MPA11-12019

  • Page 1 PetSafe ® SmartDoor Wall Entry ™ Conversion Kit - Small Pet Door Installation Guide Please read this entire guide before beginning...
  • Page 2: Table Of Contents

    To get the most protection out of your limited warranty, please register your product within 90 days at www.petsafe.net. By registering, you will enjoy the product’s full warranty and should you ever need to call the Customer Care Center, we will be able to help you faster.
  • Page 3: Components

    Installation Guide M4 4 pcs. M4 x 0.7 mm Washers 4 pcs. 14 pcs. Other Items You Will Need • Stud Finder • PetSafe Electronic SmartDoor ® ™ • Framing Square Small (purchased separately) • Level • Phillips Screwdriver • Drill with "...
  • Page 4: Measure And Cut Wall Access

    Step Measure and Cut Wall Access 1. Locate the site for your SmartDoor Wall Entry ™ installation and verify accessibility for your pet Edge of stud both inside and outside. Note: Check both indoors 5" Vertical and outdoors for electrical wiring or pipes in the wall Line area in which you wish to install the Pet Door.
  • Page 5 For fitting the Outside Frame B use the previously drilled holes as your corners. Always check that your lines are plumb (vertical) and level (horizontal). Remember to measure frequently, so you only need to cut once. www.petsafe.net...
  • Page 6: Install Supports

    Install Supports Step 1. Measure from the inside of outer wall to the inside of inner wall as shown (2A). 2. Cut a 2" x 4" or 2" x 6" to a length of 6" to 8" long. 3. Remove any debris that may be inside the wall where the support will be located.
  • Page 7: Attach The Smartdoor To The Wall Extension Frame A

    5. Use window caulking to fill in any seams and gaps in your installation. ______________________________________________________________________________ Install Batteries and Begin Training Step Refer to the operating instructions that accompanied your Electronic SmartDoor ™ purchase for detailed instructions on operating your door, and training your pet. www.petsafe.net...
  • Page 8: Product Warranty

    REGISTERING THE PRODUCT: Within thirty (30) days of purchase, please go to www.petsafe.net to register your purchase. You may be required to provide proof of purchase to obtain warranty coverage. Please keep this information in a safe place.
  • Page 9 THE PURCHASE, USE OR MISUSE OF THIS PRODUCT OR FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTIES OR BREACH OF CONTRACT OR OTHERWISE. PURCHASER ASSUMES ALL RISKS AND LIABILITIES FROM THE USE OR MISUSE OF THIS PRODUCT. PetSafe DOES NOT AUTHORIZE ANY OTHER ®...
  • Page 10 1-800-732-2677...
  • Page 11 www.petsafe.net...
  • Page 12 Radio Systems Corporation 10427 PetSafe Way Knoxville, TN 37932 +1 (800)732-2677 petsafe.com CKP400-1093/2 ©2019 Radio Systems Corporation...