Assembly Instructions - Dyna-Glo DGSS1382VCS-D Manual

ASSEMBLY INSTRUCTIONS

CAUTION: This unit is HEAVY! Do not attempt to
stand the unit upright without assistance!
1. Remove the preinstalled bolt and washer from
the bottom door hinge on the smoker body (A).
Unlatch the smoker door and remove the door by
pulling up from hinges on smoker body (A).
2. Attach the side handle (F) using four M6 x 30 bolts
(AA) and four M6 nuts (DD).
Hardware Used
M6 x 30mm
AA
Bolt
M6 Nut
DD
x 4
x 4
6
1
A
2
DD
Preinstalled
bolt and
washer
AA
F