fantastic furniture Java Manual page 6

Step 1
You will need
4 x Slides
(H15)
Step 2
You will need
6 x Slide
2 x Slide
Tracks (H15-1) Screws (H14)
Phillips Head
4 x Cam Bolts
Screwdriver
(H1)
8 x Large
Dowels (H3)
Insert 4 x Large Dowels (H3) into Side Panel (P4).
Secure 1 x Slide Track (H15-1) to Side Panel (P4) with 3 x Slide Screws (H14) as shown
by tightening with the Phillips Head Screwdriver.
Attach 2 x Cam Bolts (H1) to Side Panel (P4) by tightening with the Phillips Head Screwdriver.
Repeat steps for the second Side Panel (P4).
fantasticfurniture.com.au
Separate 4 x Slides (H15) into Slide Tracks (H15-1)
and Slide Runners (H15-2) as shown below:
H15
Press down on the plastic release lever
to extend the Slide Runner (H15-2) from Slide Track (H15-1)
and then separate the two pieces completely.
Slide Runner (H15-2)
Adjust runner to access the screw holes.
(H15-1)
(H1)
(H1)
(H3)
Use the holes shown below
on the Slide Track (H15-1) to secure the screws
(H15-1)
(H15-1)
Ensure the rubber stopper on
Slide Track (H15-1) is placed
correctly on side panel as shown.
(H14)
(H3)
(H14)
(P4)
(H3)
(H15)
Slide Track (H15-1)
(H14)
(H3)
(H15-1)
2
X
Page 6