IKEA ANRATTA Manual page 6

Hide thumbs Also See for ANRATTA:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
ENGLISH
This appliance is intended to be used
in household and similar applications
such as: staff kitchen areas in shops,
offices and other working environments;
farm houses; by clients in hotels, motels,
bed & breakfast and other residential
environments.
This appliance is not for professional
use. Do not use the appliance outdoors.
INSTALLATION
The appliance must be handled and
installed by two or more persons - risk of
injury. Use protective gloves to unpack and
install - risk of cuts.
Installation, including water supply (if
any), electrical connections and repairs
must be carried out by a qualified
technician. Do not repair or replace any
part of the appliance unless specifically
stated in the user manual. Keep children
away from the installation site. After
unpacking the appliance, make sure that it
has not been damaged during transport.
In the event of problems, contact the
dealer or your nearest Aftersales Service.
Once installed, packaging waste (plastic,
styrofoam parts etc.) must be stored out
of reach of children - risk of suffocation.
The appliance must be disconnected from
the power supply before any installation
operation - risk of electric shock.
During installation, make sure the
appliance does not damage the power
cable - risk of fire or electric shock. Only
activate the appliance when the installation
has been completed.
This appliance is intended to be used
built-in.
Do not use it freestanding or place into a
cabinet.
After unpacking the appliance, make sure
that the appliance door closes properly. In
the event of problems, contact the dealer
or your nearest After-sales Service.
ELECTRICAL WARNINGS
It must be possible to disconnect
the appliance from the power supply by
unplugging it if plug is accessible, or by
a multi-pole switch installed upstream of
the socket in accordance with the wiring
rules and the appliance must be earthed in
conformity with national electrical safety
standards.
Do not use extension leads, multiple
sockets or adapters. The electrical
components must not be accessible to
the user after installation. Do not use the
appliance when you are wet or barefoot.
Do not operate this appliance if it has
a damaged power cable or plug, if it is
not working properly, or if it has been
damaged or dropped.
If the supply cord is damaged, it must
be replaced with an identical one by the
manufacturer, its service agent or similarly
qualified persons in order to avoid a
hazard - risk of electric shock.
6

Advertisement

Table of Contents
loading

Table of Contents