THOMSON TG587n v2 Setup And User Manual page 97

2.2 Thomson Gateway GUI
Introduction
The Thomson Gateway Graphical User Interface (GIU) allows you to configure your Thomson Gateway using
your web browser.
Requirements
Javascript must be enabled on your browser. For more information, consult the help of your Internet
browser.
Accessing the Thomson Gateway Web Interface
Proceed as follows:
1 Open your web browser.
2 Browse to http://dsldevice.lan
3 If you have protected your Thomson Gateway with a user name and password, the Thomson Gateway
will prompt you to enter these. Enter your user name and password and click OK.
4 The Thomson Gateway GUI
If your computer runs Windows Vista or Windows XP, you can also access the
the Internet Gateway Device icon. For more information, see
E-DOC-CTC-20090105-0001 v0.1
2
or to the IP address of your Thomson Gateway (by default: 192.168.1.254).
appears.
Thomson Gateway Basics
Thomson Gateway GUI
"4.1 UPnP" on page 30.
using
17