Safety Information - Noyes AFL OPM5-2D User Manual

Safety Information

WARNING! Use of controls or adjustments other than those specified herein may result in
!
hazardous radiation exposure.
The OLS1 optical light source is a CLASS I LED PRODUCT.
The OLS2 optical light source is a registered CLASS I LASER PRODUCT.
The OLS4 optical light source is a registered CLASS I LED and LASER PRODUCT.
The OLS7 optical light source is a registered CLASS I LASER PRODUCT.
WARNING! To avoid the danger of fire and electrical shock:
!
• Never use a voltage that is different from that for which the AC adapter is rated.
• Do not plug the unit into a power outlet that is shared by other devices.
• Never modify the power cord or excessively bend, twist, or pull it.
• Do not allow the power cord to become damaged. Do not place heavy objects on the power
cord or expose it to heat.
• Never touch the AC adapter while your hands are wet.
• Should the power cord become seriously damaged (internal wiring exposed or shorted),
contact the manufacturer to request servicing.
WARNING! Use only the specified AC adapter. Use of another type of AC adapter can damage
!
the instrument and create the danger of fire and electrical shock.
CAUTION! To avoid serious eye injury, never look directly into the optical outputs of fiber optic
!
network equipment, test equipment, patch cords, or test jumpers. Always assume that optical
outputs are on.
CAUTION!
!
- Observe the polarity markings on the bottom of the battery box when installing AA batteries
- Do NOT insert a 9V battery into unit. It is designed to operate from 2xAA batteries only
NOTICE! NOYES power meters and light sources contain no user serviceable parts. Except
!
for changing batteries and cleaning optical ports, these units must be returned to NOYES or
authorized agents for repair and calibration.
IMPORTANT! Proper care in handling should be taken when using any precision optical test
equipment. Scratched or contaminated optical connectors can impact the performance of the
instrument. It is important to keep the dust caps in place when the unit is not being used.
4