Table of Contents
Advertisement
OLS7-FTTH Triple Wavelength Laser Source
Power port 2
External Power
indicator
- l
Wavelengths
key
Power key
OLS7-FTTH Features
1. Power key - Press this key to turn the OLS7-FTTH on or off. When the unit is turned on, it returns to
the last operating condition it was in prior to being turned off.
2. Power port (located on the top panel) - This is the interface for an AC power adapter.
3. External Power indicator - Lights up, whether the unit is on or off, when the correct AC power
adapter is connected.
4. Low Battery indicator - Lights up when a Low Battery condition exists; batteries require
replacement.
5. Output port - Universal Connector Interface (UCI). Accepts swappable SC connector (ST, FC, and LC
connector styles are available).
6. Active Output indicators - The Active Output indicators light up when the corresponding output port
is on.
7. Wavelength - l key - Wavelength select key changes the active output wavelength(s) as indicated
below for each operational mode.
1310nm
3
OLS7-FTTH
Optical Light Source
λ
7
1
1490nm 1550nm
Wave ID
CW
2KHz
1KHz
330HZ
270Hz
Mode
NOYES
Output port
5
6
Active Output
indicators
Active Mode
9
Indicators
Mode key
8
Low Battery indicator
4
27
Advertisement
Table of Contents
