Table of Contents
Advertisement
File Manager: To Select Current File
1. Press and hold the
2. A blinking cursor A to the left of FILE indicates that you are in the File mode.
A
B - File indicator
3. Use the
/
arrow keys to increment/decrement the File number.
•
Press and hold
•
Press and hold
4. Press the Store key to make the selected file current and exit the File mode.
5. The indicator FILE blinks for ~ 1.5 seconds before the OPM5 returns to test measuring screen.
File Manager: To Select Current Fiber
1. Press and hold the
2. A blinking cursor A to the left of Fiber indicates that you are in the Fiber mode.
A
3. Use the
/
arrow keys to increment/decrement the Fiber number.
•
Press and hold
•
Press and hold
4. Press the Store key to make the selected Fiber number current and exit the Fiber mode.
Test Mode: To Set Reference
1. Set your OPM5 to the desired measurement mode (dB, dBm, µW).
2. To store the currently measured level or multiple levels as the new reference levels, press and hold
the Ref key until the label HELD SET is displayed.
3. Once the new reference is set, the OPM5 switches to the dB measurement mode.
Note: When setting references from multiple wavelength ID'd sources, allow several seconds prior to
setting the references for wavelengths to be ID'd and measured.
14
OPM5 Models
Arrow/File key to enter the File Manager - File mode screen.
FILE
4
FibS
22
C - File number
D - Fiber indicator
arrow key to go to the first file.
arrow key to go the last file.
Arrow/Fiber key to enter the File Manager - Fiber mode screen.
FILE
4
FIBS
22
arrow key to increment by 10 fibers.
arrow key to decrement by 10 fibers.
B
C
D
E
E - Number of fibers in the selected file
B
C
D
E
Advertisement
Table of Contents
