Ols7-3 Triple Wavelength Laser Source - Noyes AFL OPM5-2D User Manual

OLS7-3 Triple Wavelength Laser Source

Power port 2
External Power
indicator
- l
Wavelengths key
Power key
OLS7-3 Features
1. Power key - Press this key to turn the OLS7-3 on or off. When the unit is turned on, it returns to the
last operating condition it was in prior to being turned off.
2. Power port (located on the top panel) - This is the interface for an AC power adapter.
3. External Power indicator - Lights up, whether the unit is on or off, when the correct AC power
adapter is connected.
4. Low Battery indicator - Lights up when a Low Battery condition exists; batteries require
replacement.
5. Output port - Universal Connector Interface (UCI). Accepts swappable SC connector (ST, FC, and LC
connector styles are available).
6. Active Output indicators - The Active Output indicators light up when the corresponding output port
is on.
7. Wavelength - l key - Wavelength select key changes the active output wavelength(s) as indicated
below for each operational mode.
WAVE ID Mode (WAVE ID indicator on)
Press the l key to select wavelengths in the following sequence:
•
1310nm
3
OLS7
Optical Light Source
λ
7
1
1550nm 1625nm
Wave ID
CW
2KHz
1KHz
330HZ
270Hz
Mode
NOYES
Output port
5
Active Output
6
indicators
Active Mode
9
Indicators
Mode key
8
Low Battery indicator
4
25