OLS4 Integrated LED and Laser Light Source
Power port
MM output port
MM Active Output
indicators
External Power
indicator
850/1300/CW key
MM wavelengths key
Power key
OLS4 Features
1. Power key - Press and hold the key until all indicators light up to turn the OLS4 ON or OFF. The
OLS4 turns on in its default condition: 850/1300 nm Dual mode sending Wavelength ID.
2. Power port (located on the top panel) - This is the interface for an AC power adapter.
3. External Power indicator - Lights up, whether the unit is on or off, when the correct AC power
adapter is connected.
4. Low Battery indicator - Lights up when a Low Battery condition exists; batteries require
replacement.
5. MM output port - Universal Connector Interface (UCI). Accepts swappable SC connector (ST, FC,
and LC connector styles are available).
6. SM output port - Universal Connector Interface (UCI). Accepts swappable SC connector (ST, FC,
and LC connector styles are available).
2
5
7
850nm 1300nm
3
OLS4
Optical Laser Source
with Wave ID
CW
850nm
8
1300nm
1
1310nm 1550nm
CW
1310nm
1550nm
Tone
NOYES
SM output port
6
7
SM Active Output
indicators
1310/1550/CW key
9
SM wavelengths key
Tone key & indicator
10
Low Battery indicator
4
23