Olivetti d-Color MF451 Manual page 48

4
4
Configure the scan settings as needed.
% For details on the scan settings, refer to page 4-11.
% To cancel the settings, press the [Reset] key, and then configure the settings again.
5
Press the [Start] key.
The original is scanned and the data is sent.
% To temporarily stop the scan operation, press the [Stop] key.
Reference
- Some settings cannot be combined with each other. If they are combined improperly, the settings will
be given priorities in either of the two ways described below.
– The setting configured last is given priority. (The setting configured first is canceled.)
– The setting configured first is given priority. (A warning message appears.)
- If an original with copy guard patterns embedded is scanned, the scan operation is stopped and the
job is discarded.
- If an original with a password embedded by the password copy function is scanned, the data is sent
after you enter the password.
- If multiple originals with different passwords are scanned at the same time, you will need to enter a
password for each original.
4-4
General fax/scan operation
d-Color MF 651/551/451 (Version 2)
4.1