Table of Contents
Advertisement
then test the keyboard and mouse functionality of the connected computer or
device.
8. Repeat step 7 for all of the connected computers or devices.
You should now be able to switch between the connected computers or devices. If
you're experiencing issues with the KVM switch, see the "Troubleshooting" topic.
About video adapters
If you use a video adapter with this KVM switch, you must use an active video adapter.
If you use a passive video adapter, you might encounter performance issues.
Check with the manufacturer to determine if the video adapter that you want to use is
an active adapter.
About drivers
You don't need to install any drivers for this KVM switch, as the keyboard and mouse
use generic USB drivers that are already installed on any operating system that
supports USB technology.
Troubleshooting
If you experience issues using the KVM switch and you're using a PC, you might want
to make the following changes to the BIOS settings on your computer:
1. Set HALT ON ERROR to All but keyboard.
2. In PNP AND PCI SETUP, do the following:
• Set PNP OS INSTALLED to YES.
• Set USB IRQ to ENABLED.
Instruction manual
4
Advertisement
Table of Contents
Need help?
Do you have a question about the 8STSV431HDU3A2 and is the answer not in the manual?
Questions and answers