Kvm Switch Setup; Attach The Rubber Feet; Connect A Console To The Kvm Switch; Connect Computers To The Kvm Switch - StarTech.com 8STSV431HDU3A2 Manual

KVM switch setup

Attach the rubber feet

To affix the rubber feet to the bottom of the KVM switch, peel off the backing on each
of the four rubber feet and stick them to the bottom of the switch in the indicated
areas.

Connect a console to the KVM switch

1. Turn off your computer and any devices or peripherals that are connected to it (for
example, printers, external hard drives, and so on).
2. Connect a monitor to the Console HDMI port on the KVM switch.
3. Connect a USB keyboard and mouse to the Console USB keyboard and mouse
ports on the KVM switch.
4. If necessary, connect speakers or a headset to the Console audio port on the KVM
switch.

Connect computers to the KVM switch

You can connect up to four computers to the KVM switch.
1. Turn off the computers that you want to connect to the KVM switch and any devices
or peripherals that are connected to the computers (for example, printers, external
hard drives, and so on).
2. Connect a male-to-male HDMI cable to the computer's HDMI port and to one of the
numbered PC connection ports on the KVM switch.
3. Connect a USB A to B cable to the computer's USB port and to the same numbered
PC USB port on the KVM switch that you connected the HDMI cable to in step 2.
4. If you're using audio, connect a set of audio cables to the speaker port on your
computer and to the same numbered PC audio port on the KVM switch that you
connected the HDMI cable to in step 2.
5. Repeat steps 1 to 4 for any additional computers that you want to connect to the
KVM switch.
Note: If you want to use USB 3.0 peripherals between all of the connected computers,
make sure that the peripherals are connected to the USB 3.0 ports on the KVM switch.
6. Connect the universal power adapter to a wall outlet and to the Power input port
on the KVM switch.
7. Change the focus of the KVM switch to the computer or device that you connected
to the KVM switch and turn on the computer or device. Wait for it to fully load and
Instruction manual
3