Nema Rating - Maple Systems HMI5097XL Installation Manual

HMI5000L Installation Guide 3
Information furnished by Maple Systems is believed to be accurate and
reliable. However, no responsibility is assumed by Maple Systems for the
use of this information, or for any infringements of patents or other rights
of third parties which may result from its use. No license is granted by
implication, or otherwise, under any patent or patent rights of Maple
Systems. Maple Systems retains the right to revise or change its
products and documentation at any time without notice.
Installation of HMIs
CE Compliance
The HMI5000L Series Graphic HMIs have been tested to conform to
European CE requirements, which meet or exceed the noise emissions
and immunity requirements as set forth in the EN55022 (Emissions) and
EN55024 (Immunity) standards. The products are designed to withstand
electrical noise in harsh industrial environments. They also conform to
requirements that limit electrical emissions. However, this does not
guarantee that the products will be totally immune from possible
malfunction in cases where severe electrical noise occurs.
Therefore, follow these guidelines for proper wire routing and grounding
to ensure the proper operation of the HMI5000L.

NEMA Rating

The HMI5000L Series is rated for NEMA 4 (indoor) or IP65/IP66
installations. This means that when the HMI is properly mounted to a
NEMA 4 panel or other NEMA 4 rated enclosure, the front enclosure of
the HMI will provide protection to the inside of the panel from splashing
water, wind-blown dust, rain, or hose-directed water. The HMI must be
installed according to the instructions in this manual to be properly
sealed.
1010-1018 Rev 06 www.maplesystems.com