Table of Contents
Advertisement
6. Connect Fill Source (SDI Connector 2) and Key Source (SDI Connector 3) to the SE-2800
Switcher input ports, which must be neighboring inputs. On the output screen, Fill Source
is in the front and behind the fill source is the Key Source.
7. The SDI input connected to the Fill Source is then assigned to DSK of the SE-2800
switcher. After that, other PROGRAM sources of SE-2800 switcher can serve as the
background and be switched as the user wishes.
All manuals and user guides at all-guides.com
29
Advertisement
Table of Contents
