Table of Contents
Advertisement
All manuals and user guides at all-guides.com
A view after the Garbage mask correction with the keying algorithm switched on
Comments: It should be kept in mind that in this case the object may only move within the
area of the cut off mask – otherwise the object will disappear.
Furthermore, if the Garbage mask sliders are used, it is possible to check whether the
previous settings were correct and whether they had any influence on the final look of the
virtual background.
By moving for instance the Left slider within its full range, no noise, colour shifts or changes
in the background grayness should be visible.
7.7 Post Correction
This function matches the object to the conditions of the virtual background. The following
functions are used for post-correction of the object and have no effect on its virtual
background.
Post Correction section
Enable – this enables the post-correction options to be switched on or off.
Brightness – this enables additional colour brightness to be introduced into the picture.
21
Advertisement
Table of Contents
