StarTech.com SV831DUSBUK Instruction Manual page 15

Sun/Mac Keyboard Mapping
The KVM Switch emulates a Sun Keyboard when a computer is marked with a Sun, in
the OSD menu by Function Key <F5>. A Sun keyboard has more keys than a standard
PC keyboard. These extra keys are simulated by tapping the Right <CTRL> button,
which is normally located on the right lower part of the keyboard, followed by one
of the function keys on the general keyboard (i.e. combo key). For example, tap
the Right <CTRL> key, and then tap the function key F7 to activate Open for a Sun
computer.
NOTE: For older Sun Operating Systems, the switch does not support the LowPower
option under Power Off Select.
For keystroke emulation of Sun/Mac computers, please refer to chart and conduct the
following two examples:
Stop A function in Sun: Press right <CTRL> and release, then within two seconds
press F1 and A in sequence.
Help function in Sun: Press right <CTRL> and release, then within 2 seconds, press H.
From Standard Keyboard
Press right - Ctrl and release; 1
Press right - Ctrl and release; 2
Press right - Ctrl and release; 3
Press right - Ctrl and release; 4
Press right - Ctrl and release; F1
Press right - Ctrl and release; F2
Press right - Ctrl and release; F3
Press right - Ctrl and release; F4
Press right - Ctrl and release; F5
Press right - Ctrl and release; F6
Press right - Ctrl and release; F7
Press right - Ctrl and release; F8
Press right - Ctrl and release; F9
Instruction Manual
Map to Sun
Keyboard
Stop
Again
Props
Undo
Front
Copy
Open
Past
Find
12
Map to Mac
Keyboard
Power