Removing And Installing The Processor - Clevo E4105 Service Manual

Removing and Installing the Processor

Processor Removal Procedure
1. Turn off the computer, remove the battery
2. The CPU heat sink will be visible at point
, ,
3. Remove screws (Figure
3 2 1
4. Carefully lift up the heat sink
a.
A
b.
2
1
3
(page 2 - 5) and the component bay cover
(Figure 7a) on the mainboard.
A
7b), the reverse order indicated on the label
(Figure 7c) off the computer.
B
c.
(page 2 - 8).
.
B
Removing and Installing the Processor 2 - 11
Disassembly
Figure 7
Processor Removal
a. Remove the cover and
Iocate the heat sink.
b. Remove the screws in
the order indicated.
c. Remove the heat sink.

B. Heat Sink
• 3 Screws