Removing The Keyboard - Clevo E4105 Service Manual

Disassembly
Figure 12

Removing the Keyboard

Keyboard Removal
1. Turn off the computer and remove the battery
2. Press the four keyboard latches
a. Press the four latches to
(Figure
release the keyboard.
b. Lift the keyboard up and
3. Carefully lift the keyboard
disconnect the cable from
4. Disconnect the keyboard ribbon cable
the locking collar.
5. Carefully lift up the keyboard
c. Remove the keyboard.
a.

Re-Inserting the Key-
board
When re-inserting the
keyboard, align first
the four keyboard tabs
( c)
Figure 12 that are
located at the bottom,
to the slots in the case.
b.


1. Battery
5. Keyboard
6. Keyboard
2 - 16 Removing the Keyboard
-
1
12a) *You may need to use a small screwdriver to do this.
up, being careful not to bend the keyboard ribbon cable
5
(Figure
5
1 2 3
6
5
7
6
(page 2 - 5).
at the top of the keyboard to elevate the keyboard from its normal position
4
from the locking collar socket
6
12c) off the computer.
c.
4
(Figure 12b).
6
(Figure 12b)
7
5
Keyboard Tabs